Stator Rotor Complete For Turbocharger Replacement Pressure Ratio 3.5

CR151 Stator Rotor Complete For Turbocharger Replacement Parts Pressure Ratio 3.5

CR series turbocharge design features:

• High- output range from 500 kW to 1800 kW per turbocharger;
• Compressor pressure ratios: up to 3.5;
• High efficiency and small size;
• Lower fuel consumption
• The CR series turbocharger is equipped with pressure lubricated internal bearings, externally mounted "mixed flow" turbines and radial compressors;
• The CR series turbochargers are lubricated via the oil systme of the engine using standard oil filters;
• .The CR series turbochargers are used on high-speed diesel engines and on gas engines.

CR turbocharger series include:

More picture for CR151 turbocharger rotor complete:

The composing of turbocharger rotor assembly / rotor complete:

The turbocharger rotor assembly / rotor complete consists of compressor impeller, blade shaft or turbine shaft and turbine blade. The compressor impeller is of aluminium alloy or the more expensive titanium. ufactured from a single casting it is located on the rotor shaft by splines. Aluminium impellers have a limited life, due to creep, which is dictated by the final air temperature. Often the temperature of air leaving the impeller can be as high as 200°C.

Mixed Flow Turbine Rotor Shaft Assembly

Stator Turbocharger Rotor Assembly

Pressure Ratio 3.5 Turbocharger Rotor Assembly

Stator Rotor Complete For Turbocharger Replacement Pressure Ratio 3.5 Images